Business of the Week: Third Floor Corporation

This article was published this week it is copied in full to our blog.

By : Brendan Mitchell, 12-12-2016
Ben “Doctor Structure” Fiering, the master builder at Third Floor Corporation, knows better than most that good things take time.“We try to be mindful of the time, but…” says Ben, before trailing off. He chooses his next words carefully.

“The things we build are going to last forever.”

After five minutes of speaking with Ben, it’s clear that he’s passionate about the construction and restoration work his company does every day. He’s not shy about admitting that high quality work is their number one priority.

Ben started Third Floor Corporation in 1993, but he’s been in the industry since the early eighties, when he started working construction while studying social history at college. His passion for building things had been kindled even earlier than that by his father, Norman Fiering, a skilled carpentry hobbyist.

Remodeling by Third Floor Corporation
A recent project completed by Third Floor Corporation. Architecture by David Wallance.

Third Floor Corporation was started in Manhattan, and their first project was converting old warehouse space in to a three-unit live/work space for artists. Today, they are a full-service construction and general contracting company serving private residential clients in New York’s Hudson Valley.

“I live in one of the most beautiful places in the world,” Ben says of the Valley. In his spare time, Ben enjoys exploring the area’s abundance of nature, photography, playing guitar, and studying the history of art, craft, and architecture.

Ben
Ben “Doctor Structure” Fiering at work. 

From the way Ben talks about his line of work, it’s clear that Third Floor Corporation are not your average construction company. They specialize in structural repair, and the restoration of both classic and modern architecture.

“[We have] an intimate understanding of the challenges involved in the restoration of antique buildings,” Ben says, when describing what separates his company from others. He speaks with pride and admiration when talking about his staff, the trademark of a business owner that treats his employees with respect.

With over thirty years in the workforce, though, Ben is the first to admit he’s faced some challenges.

“Maintaining a stable workflow depending on changes in the economy is a challenge.”

While 2017 is sure to hold some challenges of its own, Ben does not seem fazed. Perhaps it’s because building things is more than a job, for Ben; it’s a passion he inherited from his father.

“I grew up doing this work… I’ve always enjoyed making things.”

If you’re interested in discussing a project with Ben from Third Floor Corporation you can reach him on (914) 263 6148 or at ben@thirdfloorllc.com. You can also follow Ben on Twitter as @Dr_Structure

Looking for something else? Submit a free request on EZBZ for what you need and where you need it, and we’ll get you quotes from providers in your area. Try it out today at myezbz.com.

https://www.myezbz.com/blog/home-renovation/business-of-the-week-third-floor-corporation/134/

Employment Opportunities Spring 2016

Work at Third Floor Corporation.

White oak post notched and mortised for exterior arbor at Garrison, NY property. Fabrication by Third Floor Corporation Apprentices.
White oak post notched and mortised for exterior arbor at Garrison, NY property. Fabrication by Third Floor Corporation Apprentices.

All positions are paid. We expect commitment, dedication to craft, and hard work in return. Compensation based upon experience, skill, craft development and educational level.

We are always interested in the work of talented artisans, subcontractors in the mechanical trades and hard working intelligent ambitious people of any background.

We have an apprenticeship program for college graduates. We also provide job training opportunities for high school graduated or GED complete youth in Peekskill and Newburgh, NY . Please email a complete resume attached in Microsoft Word format with a succinct cover letter and educational background information to Doctorstructure@thirdfloorconstruction.com

Please include a clear subject line in your email with these inquiries in order to evade our spam filter. Be forewarned our filter is set to weed out the vague, the indecisive, the disingenuous, catch phrases, truisms, business-school double-speak, stereotypes, bigotry, idle chatter, and, as well– of course– malicious software.

Below is a sample of our long running Craigslist employment advertisements

Apprentice Carpenter

Apprentice carpenter to assist master bulder in high end residential construction and structural repairs of antique and classic modern houses. All custom architectural work. Steady work for individuals devoted to their craft. Busy disciplined environment.
  • Resume’s in Microsoft Word Format only. Include work and educational background
  • Reply by email only.
  • Full time year round work
  • Must have working cell phone, valid driver’s license and own transportation to work in Westchester, Putnam, and Fairfield Counties.
  • Must have tools for higher paid positions.
  • Must be in good physical condition for work in construction environment.
  • Must be able to read construction documents.
  • Must be capable of executing tasks without supervision
  • Some professional experience and education in the craft required.
  • High school diploma required.
  • Legal residency required.
  • College education preferred.
  • Strong math and technical skills a must.

Apprentice to Master Builder (Peekskill, NY)

Paid Intern/Apprentice to master builder for custom residential construction.

  • Excellent opportunity to learn the building trades as a direct assistant to experienced General Contractor.
  • Flexible hours. Excellent opportunity for Architecture, Engineering or Project Management graduate
  • Must have working cell phone, valid driver’s license and own transportation to work in Rockland, Putnam, Westchester and Fairfield Counties.
  • Must be in good physical condition for work in construction environment. Outdoors in all weather conditions. Occasional long hours. Direct participation in physically demanding construction work in a job site environment is required.
  • High school diploma or GED required. Legal residency required. College education preferred. Strong math and technical skills a must.
  • Detail oriented person must be willing to document site conditions and work activities. Must be able to follow very detailed and specific instructions and to communicate those instructions clearly to others.

Equal opportunity. Female apprentices welcome.

Principals only. Recruiters, please don’t contact this job poster.
Do NOT contact us with unsolicited services or offers.
Please respect our time. No telephone or text inquiries without prior written (email) contact including a letter of introduction and resume.

Hand Tool Set for the Apprentice’s First Day

The following list is the required list of tools to be in the possession of a carpenter’s apprentice on her or his first day of work for Third Floor Corporation.
 Ben Fiering–Fort Montgomery, NY August 29, 2015

Apprentices helpers and contractors who desire to advance to the standing of carpenters on Third Floor Corporation projects, should come to work every day equipped with at least the following tools and a tool bag or box in which to keep them organized.

[There are a variety of branded products mentioned below and a few retailers.  It should be clearly stated that this blog accepts no funds or other support from retailers or manufacturers and that these should not be considered as endorsements. They are meant only to aid in locating and identifying the tools mentioned.]

  1. –Safety Glasses.
  2. –A note pad on which notes can be taken and drawings and calculations made.
  3. –A tool belt or a combination, hammer holster and nail apron, or one of each which will accommodate a hammer, fasteners and some or other simple tools to be worn when working in appropriate conditions.
    This Carhart set shown below is light and easy to take on and off for those of us who prefer not to work wearing a heavy belt.
    http://dungarees.net/product_Carhartt_A09_Duck_Nail_Apron|BRN|-369-1.html?utm_source=Bing&utm_medium=CSE&utm_campaign=Mens%20Belts

    This cotton nail apron for less than 3 dollars is acceptable if worn with a hammer holster and a basic belt that will hold a tape measure. The master carpenter who first trained me worked this way, with a simple cotton nail apron and a hammer holster.

    http://www.globalindustrial.com/p/tools/tool-storage/Rigs-Pouches/rigs-aprons-pouches-irwin-4031051?utm_source=msn&utm_medium=shp&utm_term=B223324&utm_campaign=Rigs-Aprons-Pouches&infoParam.campaignId=WR

    http://www.globalindustrial.com/p/tools/tool-storage/ToolBags-Belts-Totes/leather-hammer-holster?utm_source=msn&utm_medium=shp&utm_term=B944767&utm_campaign=Tool-Bags-Belts-Totes-Organizers&infoParam.campaignId=WR

  4. –A knife or utility knife in good condition
  5. –A tape Measure.. and one of good quality, Stanley, Dewalt, Milwaukee, etc with a wide rigid blade of at least 16′.
  6. –A carpenter’s pencil and a standard pencil and means of keeping these sharpened.
  7. –A Framing Hammer of some sort with a waffle head. I recommend a wooden handled Framing hammer but this is not required.

    http://www.vaughanmfg.com/shopping/Products/23-OZ-Milled-Face-California-Framing-Hammer-With-Curved-Handle__CF1-HC.aspx The Vaughn “California” framer is the classic but there are many variations

  8. –A finish hammer preferably 16 oz and must be smooth faced so as no to mar finish woodwork. I recommend the hammer below. It is a lifetime tool and can be used to pry nails and such due to its strength.

    https://search.yahoo.com/yhs/search?p=estwing+finish++hammer&ei=UTF-8&hspart=mozilla&hsimp=yhs-001

  9. –A “catspaw” nail puller. such as this one shown below. There are many variations on this tool from Stanley, Vaughn, Bostitch and Estwing and Dewalt. personal preference should prevail but you should have a durable double ended tool of this type.

    http://www.toolup.com/Vaughan-BC10-10-5-Bear-Claw-Nail-Puller?CAWELAID=120204890000061219

  10. –A 12 – 16″ Flatbar This one below is from Dewalt

    https://search.yahoo.com/yhs/search?p=carpenters+flatbar&ei=UTF-8&hspart=mozilla&hsimp=yhs-001

  11. –A combination square, I recommend the classic Stanley tool below. It is durable, inexpensive and the markings are etched so they will stay readable as the tools ages and wears.

    http://www.zoro.com/stanley-combination-square-12-in-die-cast-46-123/i/G0422536/?utm_source=Bing&utm_medium=cpc&utm_campaign=PLA

  12. –A set of good long body wood chisels and a stone to keep these sharp. This set below is available at the home depot.

    http://www.homedepot.com/p/Buck-Bros-Professional-Wood-Chisel-Set-3-Piece-40603/100067444

  13. –A set of simple screwdrivers or a combination screwdriver with a #1, #2 both Phillips and flat.
  14. –A simple adjustable “monkey” wrench
  15. –A Lineman’s Pliers. These Channel Lock pliers will last a lifetime if kept oiled and dry. In a pinch you can cut through a deck screw with these to shorten it. Klein also makes a pair of these as do many others.

    http://www.eastwood.com/channellock-reg-368-8in-hi-leverage-lineman-pliers.html?fee=7&fep=26273?fee=5&fep=4990&SRCCODE=1SE1528&creative=5461472965&device=c&matchtype={MatchType}

  16. –A chalk line.”Chalk Box” .. and some chalk to put in it’ This Irwin “Straight Line” solid aluminum chalk box doubles as a Plumb Bob and has yet to be improved on by more expensive plastic bodied models.

    http://www.restockit.com/irwin-125-50-chalk-line-reel-num-586-63950.html?source=IDx20111014x00001b&utm_medium=PPC&utm_source=Bing&utm_campaign=Bing-Product-Ads

  17. –A brass plumb bob

    http://www.toolup.com/Empire-Level-908BR-8-oz-Brass-Plumb-Bob?CAWELAID=120204890000010643

  18. –A two foot Level. and over time a plumber’s level and a 4′ level.
  19. –Nail Sets such as these inexpensive standard type shown below
    https://search.yahoo.com/yhs/search?p=nail+set&ei=UTF-8&hspart=mozilla&hsimp=yhs-001

——-

In addition to these it is useful for people to have in their cars some basic painting supplies, a caulking gun putty knife etc.

A review of finishing chemistry as applied to floors.

What to Know about Wax, Shellac & Other Finishes

……..
excerpted and annotated by Doctor Structure. Follow link here to complete article in Hardwood Floors

{I excerpt here text on those finishes that are part of our typical repertoire. Often our finishing work involves a combination of these products in a set order. Shellac as a sanding sealer, Oil as a base coat, and wax as a top coat for example.
I deleted the section on Laquers from this post. I do not recommend these for floor finishes and they are not suited  for use by amateurs or entry level workers who have not mastered other finishes. Laquers also pose a significant health and safety risk when used in uncontrolled environments. They belong in the professional spray booth or master’s shop.
The author of this article does not delve into contemporary acrylic waterborne finishes. These have improved in quality, bond and durability greatly since this article was originally published.

There is in my view a form of insanity in the common practice of applying surface coats of polyurethane varnishes which once they fail must be ground off with heavy sandpaper. Oil finishes, for which I am an unashamed partisan, are renewable and so can be restored without sanding down and so shortening the life of  a quality hardwood wood floor.

For an exhaustive and thorough review of traditional finishing chemistry as applied to furniture and millwork, pick up a used copy of Wood Furniture, by James E Brumbaugh This is currently available on Alibris for 99cents and on Amazon for less than four dollars.
–Dr.S}

Wax

Used on floors for centuries, wax is one of the oldest finishes known to man. Though it was popular for many years, it’s now considered a specialty finish. With the resurgence of antique-looking floors, contractors are going back to wax to create this look. Wax may also be an option for a natural look on some exotic species. This all-natural, plant-derived product gives the wood a softer appearance and feel than synthetic finishes, and allows the wood to breathe and age naturally. Most commonly applied over an oil sealer, this odorless finish doesn’t create the fumes typical of synthetic finishes—another selling point for eco-minded consumers.

Wax comes in either a liquid or paste form and is relatively easy to apply. Paste wax is buffed in with a rag, while liquid wax is applied with a lambswool applicator. After it’s applied, wait 30 minutes for the wax to harden, then buff it in with steel wool. As it’s buffed, the wax softens and penetrates into the wood, so make sure you buff it long enough. Apply wax sparingly—too much wax on a floor attracts dirt and causes it to scuff. Wax also has a quick dry time. Once the floor has been properly buffed, it’s ready for foot traffic in just a few hours. Wax is also the most forgiving of floor finishes. If you make a mistake, you can remove it with mineral spirits and start over—without having to abrade the floor.

Wax is also ideal for homeowners who want to maintain the floor themselves, rather than having a crew shut the house down for a typical refinishing job. Even though its durability can’t compare to a polyurethane finish, if maintained properly, the floor never needs to be resanded. It is one of the easiest finishes to repair. A simple buffing and an application of more wax can eliminate traffic patterns and scuff marks on the floor.

Wax finish does have its limitations and is not ideal for every situation. Wax is relatively slippery and should not be used in commercial applications. It’s also susceptible to water spots, so it may not be ideal in a kitchen. Because it tends to crystallize and yellow, wax is also not recommended on a white stained or maple floor.

Oil

{link to Bob Flexner’s Popular Woodworking article on oil finishes}

Another way to achieve an old-world, low luster look is to use natural penetrating oils such as tung, linseed and lemon oil. Similar to wax, these finishes have been used for years to seal and protect wood. While they are a popular choice to finish furniture, they also have specialized applications for hardwood floors. These all-natural finishes give the eco-minded consumer another alternative to synthetic finishes. The fumes from these products are minimal, and lemon oil actually has a pleasant odor. Because oils show the grain of the wood and produce a matte finish, they are another option for the consumer who wants to avoid the plastic look of some synthetic finishes. Oil finishes may also be the answer to finishing some exotic species, such as teak, that can be temperamental with urethane finishes.

These user-friendly finishes are fast and easy to apply. Simply wipe the oil on with a rag, wait for it to dry and buff out the final coat. You want to apply enough oil to penetrate through the wood, but too many coats of oil can gather dirt and be more susceptible to scratch and scuff marks. And, unlike wax, penetrating oil takes longer to dry, so if a heavy coat of oil is applied, it could take several days before the floor is ready for heavy foot traffic.

Also similar to wax, penetrating oils are finishes that homeowners can maintain themselves. Because the wear surface is just sealed wood rather than a coat of finish, an application of more oil can eliminate wear patterns and return the original luster to the floor. The durability of oil-finished floors can’t compare to modern finishes, but with proper maintenance, they can withstand normal wear. They won’t scratch or peel, and lemon oil even repels water. Penetrating oils don’t have the slippage concerns of wax, so they can be used in commercial applications.
{There are hybrid modern oil formulations such as WOCA and polymerized oils that have a durability superior to many polyurethane varnish type finishes.  This article is originally written in 2002. There has been some progress in the chemical formulation of certain finishes since that time.}

Shellac

Shellac is another floor finish that was commonly used in the 19th and 20th centuries, but fell from common use when synthetic finishes were invented. Produced from the resin secreted by a lac bug found in India and Thailand, it is the only known commercial resin that comes from an insect. The hardened lac resin is scraped from trees, then processed for use in commercial applications. The shellac is dissolved in alcohol and measured in “pound cuts,” which is the number of pounds dissolved in a gallon of alcohol. The higher the pound cut,the higher the resin content.

Because this product is a natural, renewable resource, it’s now being marketed as an environmentally friendly, natural-looking alternative to synthetic finish. It also is immune to VOC standards, since its main solvent is denatured alcohol. Shellac is also non-toxic (it’s FDA-approved for use in candy, fruit and pharmaceuticals). Other selling points of shellac are that it’s quick-drying and easy to maintain and remove.

To avoid lap marks, shellac should be applied quickly with a lambswool applicator or brush. Lap marks can also be avoided by thinning the shellac with denatured alcohol down to a 2-pound cut rather than its standard 3-pound cut. This method allows you to get three or four coats of finish on the floor in five hours.

Shellac is not as durable as most typical topcoat finishes, but it’s often used under wax finish to increase its resistance to scratches. It’s easy to touch up,however, and wear patterns can be blended in with fine steel wool and an application of more shellac. Shellac is not compatible with most topcoat finishes, so usually only wax is applied over it.

….

Aniline Dye

If a wood floor is adorned with vivid, custom color, chances are it was achieved with aniline dyes. From deep black and burgundy to bright green and blue, aniline dyes expand the contractor’s color palette to hundreds of intense, deep colors that can’t be created with pigmented stains. Aniline dyes are popular for creating a distressed, antique look or for producing unique colors in medallions and borders. The dye doesn’t just sit on the surface—it penetrates deep into the wood, permanently staining the wood and allowing the natural grain to show through.

Aniline dyes are made from aniline oils or coal tar derivatives. Available in a powder form, they’re offered in different grades that are soluble in water, alcohol or oil. They can be used alone, or added to an existing stain to enhance the color. Be aware that when you add dyes to a stain, chances are the stain manufacturer won’t guarantee the results.

The drawback to aniline dyes is that they are difficult to work with, and it takes years of experience to master using them correctly. They dry extremely fast, and lap marks and blotchy spots are difficult to avoid.

Even small sanding imperfections aren’t acceptable, because the floor needs a smooth, even surface to accept the dye evenly. Map out a plan of attack for dying the floor and apply it in 2-foot-row segments at a time. Don’t try to apply too much at a time. Some contractors prefer to dilute the dye solution to a 50/50 ratio and apply it twice, with an hour of dry time between each application. If you’re using a water-soluble dye, be sure to check the floor with a moisture meter before sealing. After the floor is completely dry, a stain or sealer may be applied on top.

Also be aware of where the dyed surface is going to be in the home. Aniline dyes are not completely colorfast, and they will fade in direct sunlight. The stronger the aniline dye solution, the more likely it is that the floors will fade over time.

Bleaching

When white and pastel floors were in vogue in the ’80s, bleaching was a very popular technique for lightening the grain of wood floors. With all of the new, lighter species of flooring on the market and the bad reputation that bleaching has gained since then, it has become less common. There are still some applications, when done correctly, where bleaching is used to achieve a desired look, such as a distressed, driftwood-colored floor. Contrary to popular belief, bleaching does not turn a floor white—it lightens the floor’s natural color, evening out its tones. It’s often used to take out the redness of red oak. It’s not for use on all species—it may produce a greenish cast on white oak floors.

Bleaching damages the fiber of the wood, so it shouldn’t be over-applied. Only one application is all that is recommended, though some contractors use two applications to achieve a consistent tone. Apply it with a sponge and use only bleach made for wood flooring, preferably a two-part bleach.

Be sure to read the instructions and neutralize the bleach if necessary. The water used in bleaching raises the grain of the wood, so buff it out with a screen or double-sided disc, typically 80-grit, before applying the sealer or stain. Some finishes are not compatible with bleach, and others may cause the floor to yellow or amber, so choose the topcoat wisely. A non-ambering surface finish is recommended. ……

Click this link for complete article

http://www.hardwoodfloorsmag.com/sanding-finishing/what-to-know-about-wax-shellac-amp-other-alternative-finishes.html

Off-Grid Octagonal Tiny House, Greene County New York

This octagonal tiny house was a design build project of Third Floor Corporation. It has field built cross laid laminated beams as wind bracing. The roof is both insulated and vented. It is heated by a small wood stove. The electrical system is a direct wired 12 volt direct current. The photovoltaic collectors power a marine grade electrical components and devices such as might be found on a small yacht.
The house was designed as an isolated a writer’s study. It is about one half mile from the nearest hard surfaced road.

Off Grid octagonal cabin PV solar, with wood heat. Greenville NY.
Off Grid octagonal cabin PV solar, with wood heat. Greenville NY.